![]() Move the pry tool along the entire bottom and the case will loosen. The idea here is to push the pry tool into the seam at the base of the Steam Deck (pictured above). Removing the case can cause damage to the memory card if you’re not careful, so it’s best to remove it now. Before attempting anything, be sure to remove the microSD card if you have one plugged in. Once extracted, you should be left with the following:įor this I used the pry tool that came with the JSAUX Steam Deck backplate. Tip: The outer screws are a different size from the four inner screws, so be sure to place them separately. With the Steam Deck powered off, place it face down on a flat surface and remove the eight screws highlighted in the image above. Valve also recommends you put the Steam Deck into battery storage mode before attempting any kind of modifications. Safety PrecautionsĪs Ifixit notes, you’ll want to let the Steam Deck battery discharge to below 25 percent before opening it up due to the dangers of accidentally piercing a lithium-ion battery. That’s why I’ll be going over how to reimage the Steam Deck after the SSD is fully installed so you can get it back up and running faster. Once the SSD is installed, it’ll work, but you won’t have an operating system, meaning the Steam Deck won’t do much. You will also need a computer with an Internet connection and some form of storage like a microSD card or a USB thumbstick and a dock. ![]() ![]() The above is directly for the SSD installation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |